PP 中石化茂名PPH-T03|PP透明级 纤维级
PP 中石化茂名 PPH-T03
公平是
大的实惠
供应抗撞击PP、食品级PP、耐热级PP、耐候级PP、高流动PP、抗静电PP、抗紫外线PP以及吹塑级PP、挤出级PP、透明级PP等通用塑胶
供应台湾台塑PP,台湾南亚PP,韩国三星道达尔PP,韩国三星PP,韩国晓星PP,韩国现代PP,韩国湖南PP,韩国LGPP,韩国SKPP,韩国大林巴塞尔PP,大韩油化PP,泰国石化PP,台湾台化PP,台湾福聚PP,茂名石化PP,新加波聚烯烃PP,埃克森美孚PP,印度信诚PP,沙特PP,北欧化工PP。
均聚薄壁级PP:HF400,HF407,HF409,HF420,HF429。
均聚射出级PP:HI831,HJ400,HJ500,HJ700,HJ730,HJ730L。
均聚纤维级PP:HY110,HY200,HY300,HY301,HY311。
均聚被覆级PP:LH72S。
均聚板材级PP:HS120
高结晶射出级PP:BI451,BI452,BI518,BI530,BI616,BI730,BI740,BI750,BI830,BI970,BI831,HJ730,HJ730L。
高结晶薄膜级PP:BI300,HF470,HF409,HF429。
块状聚合射出级PP:BI451,BI452,BI530,BI616,BI730,BI740,BI750,BI830,BI970,BJ100,BJ300,BJ500,BJ501X,BJ520,BJ522,BJ600,BJ700,BJ730,BJ732,BJ800,BJ820T
块状聚合板材级PP:BB110。
随机聚合物三元共聚物 吹塑级PP:RB200,RB210,RB221,RB230。
随机聚合物三元共聚物 板材级PP:RS401。
随机聚合物三元共聚物 薄膜级PP:RF401,RF402,RF450,TF400,TF418,TF430。
随机聚合物三元共聚物 射出级PP:RJ500,RJ700。
随机聚合物三元共聚物 被覆级PP:RC770。
管材等级PP:RP100,RP100E140,RP100G160,RP100N120,RP100W130。
PP is a semi crystalline material. It is harder than PE and hasa higher melting point. Because homopolymer type PP is very brittlewhen the temperature is above 0C, many commercial PP materials areirregular copolymers with 1-4% ethylene or clamp copolymers withhigher ethylene content. The copolymer type PP material has lowerheat distortion temperature (100C), low transparency, low gloss,low rigidity, but stronger impact strength. The strength of PPincreases with the increase of ethylene content. The Vicatsoftening temperature of PP is 150C. Due to its high crystallinity,this material has good surface stiffness and scratch resistance.China Plastics online plastics Encyclopediahttp://baike.21cp.com
There is no environmental stress cracking in PP. In general, PPis modified by adding glass fiber, metal additive or thermoplasticrubber. The MFR of PP ranged from 1 to 40. PP with low MFR hasbetter impact resistance but lower ductility. For the same MFRmaterial, the strength of copolymer type is higher than that ofhomopolymer type. Due to crystallization, the shrinkage of PP isquite high, generally 1.8 ~ 2.5%. And the directional uniformity ofshrinkage is much better than that of PE-HD and other materials.Adding 30% glass additive can reduce the shrinkage to 0.7%. Bothhomopolymer type and copolymer type PP materials have excellentmoisture absorption resistance, acid-base corrosion resistance andsolubility resistance. However, it has no resistance to aromatic(such as benzene) solvents and chlorinated hydrocarbon solvents.[2]